-
When saving a view ignore the case sensitivity
We have a 10-minute rollback sometimes and we are very careful to ensure formulae and entries are correct. The one annoying thing is case sensitivity on views. I had to wait 12 minutes because I saved a view as Customer Data and then saved as Customer data. It does not ask if you wish to replace and it does not allow the…
-
Contents of import actions
For import actions it would be good to have a column in Imports tab. suggesting which of the source items(list or lineitems) are mapped to target. Not the natural mapping by anaplan but any thing which is manually mapped and saved rather than opening each action and figuring out.
-
Have the Docusign Add-In Update the Status of Documents Automatically or have an 'Update All' button
* Description: Currently, in the Docusign add-in, you have to manually click into each document and click on update to get the current status. This is painful if you have a lot of documents. * Example of Enhancement: The best solution would be to either have this automatically update regularly, or have an 'update all…
-
Excel Add-in: updating cells with Dynamic Cell Access and have a list format
Possibility to change data in cells with Dynamic Cell Access and a list format with a read/write connection in the excel addin
-
Bulk Copy over a selection of two or more dimensions
Dear all, Would be great to bulk copy data on a certain combination of dimensions: For example to copy the data of one Store to a specific other store but just for a selection of months and a specific version. And make it possible to create an action out of it; it would allow end-users to pre-populate a new Product, Store,…
-
Import into Parent Level using BreakBack
I would be really good if we can import data into the Parent Level when Breakback is enabled. Currently, it is not possible in the system . Hope to see this functionality soon in Anaplan!! 🙂 🙂
-
"Omit Summary Items" on Exports should be an option for Imports
Currently, there is an option to "Omit Summary Items" when you are exporting data designed to exclude parent hierarchies. However, there is no such option for imports and this requires users to create saved views that manually exclude parent levels and can cause a lot of manual work for model builders. Without removing…
-
Exclude Line Item Subset from data export
Hi Team While exporting data from a module, if there is a 'Line Item Subset' in the dimensions, we are unable to exclude it from Export. Can you please make the option available? I have provided some screenshot. Thanks & Regards Kudi
-
Data Integration with Single Click from Anaplan Dashboards - REST APIs
I am looking for an option in Anaplan Dashboards to put a link which will trigger REST APIs and execute the Anaplan operations which lies in the code behind it and return the results. With this way, we can plan to integrate many sources with single button click from Anaplan itself rather than using Anaplan Connect.
-
Renaming line items should be propagated to import definitions
Currently renaming a line item correctly updates all module formulaic references. However, it does not get propagated to import definitions and Anaplan silently "ignores" the change i.e. the target column stops getting populated without any error or warning. Ideally name changes should get reflected in all aspects of the…
-
Export button on the Imports tab under Settings > Actions
I frequently export the Imports table under Settings > Actions when troubleshooting or working through a model. Connections between models or modules/lists through actions are not displayed in the model map so I highlight the Imports table and copy/paste into excel to diagnose/troubleshoot actions and discover…
-
Import Saved View - Filter
Hi all, A bit surprised this topic isn't here as it's one of the most common frustrations, similar to the post here. When importing from a filtered saved view there are a lot of cases of missing values. We all encounter it, and the first time it takes very long to determine the root cause. We change the filters but then…
-
Excel add in sorting
Can we have the option to Re-Order and Sort List items during Pivot ? In General, Custom Sorting is very important when people need to work from Excel.
-
Excel Add-on: Sheet names update when changed on Anaplan
As an end user I would like the names of any sheets to update upon refresh if the associated module on Anaplan is renamed.
-
Have imports run base on the display name rather than a unique ID
This can be an issue when running a Module to Module Import, if both the target and the source module are dimensioned by numbered Lists, if the target Module's numbered list(s) the import will coordinate the import based on the numbered list(s)' Unique IDs. This means that some values will fail to import and other values…
-
Ability to manage metadata (add/delete/re-parent list items) via the Excel Add-in
Summarized Feature Request End users need the ability to manage list items, i.e. metadata, via the Excel add-in. By far the highest-priority and highest-value need is to add new list items. Situation Users switching from Oracle Hyperion / Essbase love the Essbase SmartView Add-in for office. One of the reasons they love…
-
Ignoring some columns when mapping timescale through column headers
When we get a source file with time in the columns it is very common to have columns that are not relevant for the mapping. As time usually requires using an "automatic" mapping it is quite inconvenient that columns that are not relevant are processed as a FAILURA in Anaplan. It would be fantastic to have the option to…
-
Cancelling Import will remove any partially imported data or list items
As a user, I would like any partially imported data or list items to be removed when I cancel an import. Currently, when an import is cancelled mid-way through, any partially imported data or list items will remain after the import is complete. However, the history will show that the import was cancelled. This will help…
-
Audit during bulk uploads
The User would like: A more detailed view of auditing functionality during the ‘bulk upload’ process at the cell level and create an ‘action’ during import. The action would be created upon export of the audit history. During the Sales planning process the User takes the 1st pass of Territory assignments and has the field…
-
Excel Add In - Add Properties Similar to Labels Tab when exporting out of Anaplan
It would be great if you could add properties in the excel add in, similar to how when you export from Anaplan you can add properties from the underlying list using the labels tab.
-
Excel Add-in: Ability to detect if columns have become unlinked via named ranges
As an end user It would be useful to be notified when a column becomes unlinked from Anaplan and is no longer being updated. Currently this can be done by searching what is contained in the named range “AnaplanColHeader“. Note: LI1 has become unlinked and will not update on refresh. This could be done via a pop up that…
-
Fix Import Dialogue on Ultra Wide Resolutions
Please can the import dialogue be fixed on ultra wide resolutions? Everytime I import, I have to resize my window so that I can see all of the dialogue options, screenshot attached. Typically the Run Import and OK buttons are missing. Thanks!
-
Ability to reorder multiple list items or reorder a list by its code numerically or alphabetically
Some of the master data lists within our model is based on numerical codes. New list items get added to the list at the bottom and we would have to manually reorder it to the top using the 'Move...' functionality. Using this, we are only able to reorder one list item at a time, which can take a significant amount of time…
-
Deployed Mode - Bulk update of Source model name (M-M Import actions)
Hi Team, Current Scenario: In the Deployed Mode, for the Production Data checked Import Actions (Model to Model), we have to manually update the Source Model name one by one. Suggested Change: Select Multiple rows of Import Actions and update the Source Model name at one go for the selected ones. Thanks Sathya
-
Information for Line Item Referenced By Actions
It will be helpful to have information for any line items that are used or mapped in actions either in list or line items mapping tabs. This will prevent deleting them accidentally when performing a model cleanup
-
Export Action Dialogue NUX
Please can the full export action dialogue be added to the NUX when exporting from worksheets? Currently, users only have the option to edit the export file format (e.g. .xlsx, .csv, .txt). Would be great if users had the full array of options as shown below, without setting up a custom action.
-
Remove Line Item Mapping when Item is Removed from Import Data Source
Within the Line Items tab of the import dialogue, please can line item sources be removed when these are removed from the import data source. Take the below as an example: If I were to remove Revenue from the import data source, the Revenue line item source would still appear on the left to be mapped to a line item target.…
-
Run multiple actions from selection in Actions panel
Would be great if you could run multiple actions from the actions panel based on your selection. For example, if you selected two import actions and hit Run, Anaplan would run those two actions as though they were in a process. This would greatly help model builders test actions where creating a process is not needed. The…
-
Data Quality/Integrity Checks within Connected Planning Environment
Hi All, In thinking and implemented a Connected Planning environment, where we have specific models for specific areas our finance team that are brought together. We currently have a number shared hierarchies (across cost/profit centre, GL), shared data (TB, Subledger etc) and currently handled via the data hub as the…
-
Import Enhancement: Tab- Line Items: Being able to select Multiple, All, or blank "Mapped to"
Currently when Mapping a file, view, or similar, if you have extra line items/columns, Anaplan doesn't always identify that a new line item is selected, and takes multiple attempts to have your selection identified. (Bug, and I use Chrome with 90% zoom) Being able to Map everything you are going to map, then select all…