-
Edit Revision Tag Description
Please enable the ability to edit revision tag descriptions. Thanks!
-
Select display name of a numbered list in the configure tab
It would be good if you could choose the display name of a numbered list item in the Configure tab, as well as going to the list settings.
-
Display of Selective Access-enabled Numbered Lists
Although not ideal, sometimes it's required to enable selective access on a numbered list. First of all, you should be able to import comma-delimited text-formatted codes into the Users list to assign the appropriate list members to each user. Short of that, Anaplan requires that you go into the numbered list and select…
-
Model impersistence across pages in the application
Our case: We are separating clients data into different models and manage access via those models administration We have a single application that points to those models and allows users who have access to switch between them (assuming that they would switch between clients data sets) When user switches pages of the…
-
Retrieve Cell Data for a view via API for non-admin users
We are able to retrieve cell data for a view, but that’s possible only for Workspace Administrators. Generic accounts always do not have admin licenses and there's no way they can read cell data. Without admin setup we are not able to neither wright back, nor read back. If non-admins could read cell data it would allow to…
-
Functionality of resending Anaplan Welcome email to end users to set their password
When we add new users into Anaplan application, sometimes i can see users are not receiving welcome email to set their password even after checking in Spam . In such cases currently we are sending email to Anaplan support on behalf on end user to resend welcome email to end users. This process is working but it is time…
-
Showing Locked User Status
Recently we found our Anaplan Connect job failed because the integration user account to run the Anaplan Connect script was locked due to five failed login attempts. However, only Anaplan Support can check this information. It will be useful if the user status if also displayed as part of the Users setting in the model.…
-
Model copy not being logged in the source model history
When performing a model copy, it is logged in the model copy's history, but not in the source model's history. Nvidia requires any model copy taken to be logged in the source model for security purposes. Below is the history log of a model copy I made. It is logged in the model copy. If we could have a similar entry log in…
-
Log Model Mode changes in Audit Logs and Model History
When a user changes the mode of a model i.e. from Standard Mode->Deployed Mode, Standard Mode->Archived Mode etc, it would be useful to have this event logged in the Anaplan audit logs and the model history logs. This would be useful in identifying which user has changed the model mode especially when a deployed model is…
-
Automate reset of Selective Access
We're looking for a way to automate updates of selective access which would include: 1) clear all existing list member access 2) set new list access. Would like to have this automated via an import action. Current imports into Selective Access appear to only be acretive. Importing NO ACCESS into User Role, reloading…
-
Allow for filtering on Users tab
As a Workspace Administrator, I'd like to be able to filter and sort the Users tab based on values in different columns — just like we can do it for modules. The most important is to allow for filtering on 3 columns: Model Role, Workspace Administrator and Single Sign-on. This could really help with managing users access…
-
"Model Health" / Performance Dashboard
As an external Anaplan partner, we get regularly the question to look into the performance and structure of customer models to assess the health of a model and to find opportunities for improvements. I built for this a model that allows me to upload f.e. line items and gives direct insights on key areas like size, usage of…
-
Improovment on "ALM" for App thanks to Multiple Sources Models / Preview Function
It's very useful to have multiple sources models for one App in order to have our DEV and PROD model together. However, we nee to improove some functionalities : - Be able to "flag" easily the DEV Model thanks to an icon or color to inform/alert users if they are on DEV or PROD Model - User not Page Builder should not see…
-
Anaplan Service Notifications by Text message to Mobile
Hello, I would like to suggest the idea of enabling Text messages to mobile by Anaplan for any Anaplan service notifications. This enables a faster response time to let business know in case of any unseen Anaplan outages and also provide the ability to quickly mitigate any downside impacts to other process.
-
Make Bulk Copy respect the Selective Access settings
Dear all, Seems it would be great to limit Bulk Copy area by the Selective Access rights. For example, I have a model with two departents with similar business cycles, but version fixation should happen a little bit different days (from the very beggining it wasn't like that, so we didn't expect this new requirement).…
-
Set role based page security in NUX in bulk
Currently, page security is set by going to individual pages in NUX and selecting roles that can access the page. It would be nice to have a single area a page builder could go to set security for all pages that have been created. Even being able to set security for categories would be a fast way to enable security in the…
-
Copy Line Item
As a user, I want to have the ability to copy a selected line item while in blueprint mode. This functionality would save time and prevent potential user errors/toasts. I will know this is successful when I have the ability to copy an existing line item and type the name in a dialogue box that is brought up after pressing…
-
Warning message before, not after Synchronisation [Lack of Space]
Hello everyone, I think it would be good to have some sort of warning message appearing before you decide to push Synchronise in the Compare/Sync windows. Many times (and not just myself, but my colleagues as well) when the synchronisation starts we need to wait for Anaplan to push all the required changes - or at least…
-
Password protection to Excel Add-ins
hi, we've got users who have been asked to increase the security of the data they hold. They currently use Excel Add-ins, and tried putting password protection onto their spreadsheet. However, the data uploads failed with password protection activated (even though they'd already opened the spreadsheet with the password).…
-
Not lose your data in Prod model when you change a list from Structural to Production and sync
List A was Structural in dev and prod models. I now want to have list A as production so change it in the dev and sync with Prod. The problem is that as a result I lose my list items in prod model. So when this move from Structural to Production list happens, I would like to be asked whether I want to keep my data as it is…
-
custom function script
Allow users to create custom function via a scripting language like Java. The idea to me is have the capability to become as flexible as needed with scripting. The use case i have in mind is being able to create a hashing algorythm to use as a code. This can be a work around to the 60 limit character limit.
-
Add column in models Users' list: Enabled (view only)
In Anaplan models, in the Users list, we would like a column "Enabled" that is a view-only column based on the user's Enabled status in the Central Identity Management User Admin (in Tenant Admin). Currently in the Users list in models we lack visibility to whether a specific user has status enabled of disabled in the User…
-
NUX Page History with Restore Options
So we have all done it changed a page and then realised that the original version was better and want to return to the previous version. With the Classic Dashboards we had the option of a Model Restore and or check the Production version of the model before we synchronise the changes. What I would like to see is a Page…
-
Tenant Admin Enhancements - User Management
As a tenant admin user who's instance spans many organizations, workspaces, and contracts on the same tenant, there is a need to enhance the tenant admin for user management/reporting across the platform. Our instance holds hundreds of unique users belonging to different groups, functions, workspaces and models. Currently…
-
UX: Card Blocks/Groups
Initial Idea: (1) Would be nice to be able to group cards on a page into a single container and save it as a single template. This will allow me to save time on repetitive builds where I have to publish the same header with 10+ separate cards on all my pages (workflow status steps, filters, company photo, custom…
-
Grant access from a role to process, not individual actions
It would be great if we could grant access from a role to a process rather than a specific action. It's cumbersome and could change over time and be easily missed.
-
Refactor the action "Imports" tab
The action import tab should include: - all the info that is in the first tab the source ID ( especially the last execution date) - source object should be exploded into workspace/model/module/view fields - the data source ID should be available here as well - an export button, just like on the first tab - the ability the…
-
My Pages - Admin Overview
I see that the My Page feature has picked up significantly at some customers, particularly with worksheets. Yet, as an admin it's a great trouble to understand the impact of changes to these personal pages. Today it is only possible to see the number of "My Pages" created by each model. As a Workspace Admin, I want an…
-
Expose names in addition to IDs for Audit Service and Audit API
When using either the Audit Service or Audit API, it is difficult to identify the user, tenant and object based on the IDs. It will be extremely helpful to expose the names together with the IDs. Audit Service:…
-
Turn off mobile access to specific apps or pages
As an Anaplan admin, I want to be able to create apps and pages without users having access to them via the mobile app. I know this is successful when I can either turn off mobile app access in general or select by app/page to be included in the mobile app access. This would allow anaplan clients to use the new look and…