Modeling

Percent calculation
Hi, I'm trying to calculate the following: if field a< 20% of field b then 1 else 0 How do I approach this? Please help. Thanks
Line Item View Selection based on List dropdown
Hi, I have to show only 1 relevant line item on the Dashboard based on the page selection. I have showed in the Test screenshot below. Like in above module if I want to show only Line item 1 if I select List Item 1 from the above dropdown and if I select List Item 2 from above then I can see Line Item 2 when I published…
2.3.9.1
I do not understand why there is no source object, due to this reason I am not able run the process...
2.3.9.1 Import Data into DAT03 Historic Volumes module
I do not understand why I have to upload the file again...
Formula defaulting to editable in new model experience
I'm getting used to the new model experience, and overall it's a good step forward. However, I have one major frustration, which is that the formula goes straight into edit mode when I expand it out. In most occasions, when I click the 'expand' arrows on the formula bar, it is just so that I can read the formula in full,…
Module data transfer from time scale to different time range
Hello Everyone, I have two modules as mentioned below.I need to get data from module1 Jan20 to module2 Jan21 and same follows for other months. Module1 Time Scale -FY20(jan to Dem) Line item - Data Module2 Time Range -FY21(jan to dec) line item-data1 Can someone help me with this. Thanks Tejaswini
line item total in another column
Hello guys, pretty sure the solution must be simple but i cannot find it. I am trying to use the total of a line item in another formula. what i have looks like the screenshot Thanks in advance 🙂
Remove Workspace Admin for Reordering List Action
Hey Community, I love the ability to reorder lists, but I don't love that I can't enable users to do this. I have a mini- MDM project buried at one of my clients and reordering data is a very nice thing. The catch is unlike other actions where I can restrict access to the Action...this one doesn't matter as you need to be…
Bulk Copy from a dashboard
How do I give dashboard users the ability to run a bulk copy from a button on the dashboard? Specifcally I have a list which contains "versions" I want to make the copy of Current Month to Prior Month an end user action from a dashboard.
4.6.5 Sale Planning Model: DAT02 module
Hello All, Please note, while working on 4.6.5 Sale Planning Model: DAT02 module, below are the steps i have completed- 1. Created A2 Accounts. Product# list and updated it with concatenated codes 2. Created new Model DAT03 PY Revenue from Data Hub for inputting data from Data Hub 3. Created DAT02 PY Revenue to CY as per…
Movingsum
Hi, For your assistance please. I am trying to aggregate specific invoices and tried using the movingsum but on the last invoice cut off 4 which the number of days are variable. How can I count and use the movingsum? or is there another formula I can use? Example : August 2021 Invoice cut off 1 - starting 1st of the month…
Level 1 Model Building Certification Exam : Unable to format Roles as List in SYS08
I am having an issue with the Role list. When I try to format the Role line item in SYS08 it gives me this error: Format of mapping used for lookup doesn't match any dimension of the source. I've attached a screenshot of the blueprint. I've had no luck fixing this issue and I'm going on hour 4 of trying to finish this…
Fake Week and Sum with Month
Hi, want to SUM value with Month. I set the time setting as "Week General". It has no month aggregation, so I made the Month List. And I calculated month value as a described below. <Solution1> Formula: TimeSum(Weekvalue, start, end) ＋value(adj)[Lookup:start-1] - value(adj)[Lookup:end] week(start/end) start end weekw6/28…
Real time inventory model
Hello Anaplan Community, I am attempting at building a real time inventory model that has kafka and postgreSQL integrated with Anaplan and has a base code in Java. I was wondering if anyone else in the community has an experience with similar techniques and would want to collaborate or offer any advice. I was also trying…
TIMESUM syntax error
Hi everyone ! I am currently doing the Level 2 Model Builder, Sprint 1, and I am stuck at step 1.5.7 Basically, I need to feed a boolean Line Item called "Has Data?", which is on the SKU ; Account dimensions from a numeric Line Item called Volumes, which is on SKU ; Account ; FY19 dimension. Therefore, I need to aggregate…
SUM with Week general value.
We're using "Week General" as Time Setting. Week General has day and week value, but does not have Month Value. So I made Month List(Jun21-Dec21), and I want to aggregate the value from day to month. I used "Timesum" function, and could aggregate it week to month. Formula：Timesum(Lineitem, Startweek, Endweek) But I could…
Import Data
Hello Dear all, How to set the data as a Custom Mapping?
Training questions
Hello all I am new to this and want to start learning level 1 model builder. How many classes are required for it and how much is the cost? On instructor led training, it shows class registration with fees of $1750, is that a fee for one class? Please guide. Thank you .
Source to Target Mapping for Imports into a Module
Please select the column that contains the data values. What is error do mean, and how to fix it?
Version limitations
Hi All, Version as list has limitation ,,,that we can not use Switchover. Why we can not add this in scenarios? Also Why can we not use Switchover in line item to fetch a formula and scope to use it?
Dynamic Recipient Notifications. New UX. Notifications from Module by Group.
Hi! I have a question about this feature. I tried to figure out if it possible to send out notification to the whole department for example ... And this is what I have now. Even if I put couple of emails, It saying that there is no recipients. What should I check in order to do that? Or may be it's not possible to do?…
Level 2 Sprint 1 1.6.2.2 Create Saved View for Export
While importing Shipping Metrics.csv to module DAT02 Shipping Metrics, you may get invalid data format error. To solve the problem: simply edit the date format by Untangling Anaplan Time Mapping: to edit the FY( fiscal year) use: ??YY This solves the error. FYI
Lengthb / LENB function
I would like to request a function to get the length of multibyte string in Anaplan. In some countries such as Japan and China, users can use multi-byte characters to enter number and alphabets. Our user wants to avoid entering the list name (i.g. Customer Name) in multi-bytes by mistake. Currently, end users can set same…
Level 1 Activity 13.6.5
Hi, In activity 13.6.5 of the L1 MB course I am supposed to use Custom Views and use Time to filter such forecast is shown by months and FY totals. In the model view the FY totals show at the end of the year. However, in the Custom Views it is at the beginning. Please see attached screenshot. How do I get the year totals…
Multiple Items Identified as First Occurrence
We have a module dimensioned by Time and Item ID. One of the Line-Items in the module is Item Category. We need to identify the unique categories. ISFIRSTOCCURRENCE seemed to be the answer but it is identifying each category as being the first occurrence multiple times, once for each period. How can we identify the unique…
Level 3 Model Building Sprint 3 User Story 1.2
Hello, I am sure, this is very basic doubt, but i am not able to solve it. In 3.2 section, where we have already imported Baseline Financial Forecast from Excel sheet, now we are supposed to enter Stretch Goal/ Percentage increase for country's. My problem is, i am not sure how to enter time in one go. When i am going on…
Dependent dropdown
こんにちは！従属を使用してプルダウン項目を制限する場合、親階層を表示することは可能ですか? 仕様を知りたいです。
Time summary setting for a line item with "Formula" summary setting.
Hi All, I am currently working on a requirement to cumulate the value of a line item. For this line item I have opted for the Summary method - "Formula" but I dont want the overall total sum for this column; I tried to change the "Time summary" for this line item , but it is throwing me error - Invalid combination of…
L2 Sprint 1: 1.5.3.1 Create Filter and Saved View for DAT01 Module - Issues with Filters
Hi, Im having some issues with activity 1.5.31 creating the filter for DAT01 Module, when I set the filter in place to show only values different than 0, i cant find the button to confirm the transaction and apply the filter. Can anybody help? Below snapshot. Thanks
Help Replicating Excel Formula
Hi, We are trying to replicate the following set up and formulas from the below Excel snap shot into a Module. Currently the Module is set up where there are two list in the rows. In the Excel the formula for the Rollup is based on a calculation and we want to replicate that in Anaplan, but in Anaplan the Parent item…

Modeling

Discussion List