-
Remove gap in Column Charts when row is a list
I'm finding that when you use a list as row in a column chart you get a gap at the edges (colored chart below) but if you pivot the dimensions such that you have line items as rows the gap is removed (2nd chart below). Visually the gap is just a nuisance really and hoping this is a quick fix for Anaplan to address.
-
Forms dependent dropdown by calculated line item
This information was shared in the August 2023 release notes. Dependent dropdowns in forms: Page Builders and Model Builders can leverage relationships between different lists when creating new items using UX forms. No additional modeling is required as forms will automatically respect the rules built into your line items.…
-
Pull data from multiple models into one report in New UX
Hi, It would be very useful to pull data from multiple models into the different slides of a report in the new UX. For example we have separate models for daily sales/product performance, Finance (P&L etc) and HR (Headcount). Being able to produce a single report that contains data from each of these models would be great…
-
Basic Calculations in Front End
It would be very helpful if it would be possible to make basic calculations (plus, minus, variances,..) in the front end.
-
Anaplan links to open Anaplan App when used on Mobile Device
Many Anaplan users request being able to link directly to pages in the app. Even when opening a link on a device with the app installed, it will go to the browser version. It makes users much less likely to adopt Anaplan in cases where they prefer the app and need to share links for specific pages. It would be very…
-
Search option in manage models pane
As a model builder its difficult to look for a particular archived model as there is no search option. And also when we click on archived models its a mix of standard & archived. For example we have more than 100+ models(archived+standard) in our workspace. In such cases its too difficult to search for an archived model…
-
Option to Align Card Contents
It would be very helpful to be able to right, left, top, or bottom align items within cards. This would apply to actions, images, etc. that currently auto align to the center of a card.
-
Synchronizing Master Data Names Based on Other Dimension Names
Is there any possibility that could automatically synchronize the name of master data elements based on the names of items within another dimension. Essentially, when an item name is change in the top selector in one dimension, we would like the corresponding master data name in another dimension to be updated…
-
Anaplan Maintenance Break Banner for the User
Is there a way to have some banners in Anplan during the routine maintenance from Anaplan saying something like "There is currently maintenance ongoing…" or "There is an unexpected maintenance break, please follow this link for status…."? So that the users do not get confused as to why they are not able to log in or access…
-
Excel Add-In - Option to Switch to design view
Please could you create a new button/feature in the Excel Add in to allow switching to design view. Excel is a great tool for presenting and autosizing column widths and for working on Module layouts and for sorting and filtering relevant columns and rows during a module build. When I do a rebuild a module. I often need to…
-
Reset of End User Card Specific Sort/Filter when feature is enabled/disabled
Currently experiencing issues with end users related to card specific filtering/sorting. Previously, the sorting/filter features were enabled and end users were using them. We then moved to using modules to do syncronized filtering on all cards and disabled the card specific sorting/filtering. Finding out now that the end…
-
NUX - Allow List Attributes/Properties to be included as separate row headers
Can Anaplan provide functionality that allows Grid with Time dimension to also display Attribute data for the list item? This reduce the amount of cards needed on the dashboard, improves useability Example screenshot below.
-
Specific company logo and/or header color
It would be nice if we could add a specific company logo either in the white navigation pane, either in the top blue navigation header (in this case by replacing the Anaplan logo or place it next to it). A bonus would be to select a specific color this blue navigation header. It would avoid adding the logo as an image…
-
New UX: Ability to update the color of header bar's and other action cards
Hi, It would be great to have the ability to change the colors for the below: * Ability to change the color of the bar's that appear in the New UX at the top from Blue to any other color as per user's choice * Ability to change the color of the action cards in the New UX from Blue to any other color as per user's choice…
-
NUX Show/Hide Function Enhance
In NUX, Show/Hide (Eyeball icon) Function controls line item, time or other dimension items to show or hide. When working on multi card dashboard, it is tedious to filter cards one by one. Can Anaplan provides centralized Show/Hide feature based on the line items available on the dashboard? So user can filter easily…
-
Ability to select Variance or Variance % by Line Item in Reports
In Reports, you can select a Variance column that either does a normal Variance (Q2 - Q1), or a Variance % (Q2-Q1/Q1). We want to be able to have some Variance and some Variance % in the same column. Need to be able to select, by Line Item, which type of Variance to use.
-
Highlight Selected Cells in the Grid
Currently when selecting cells within the data Grid, boarder line is so thin and not clear. Please consider provide highlight effect or coloring on selected cells like example below.
-
Standardize Selector Filter on NUX
The Line Item /Hierarchy Selector gives different selection in regular Worksheet Grid vs Additional Insight Card. Worksheet selector provides filter capability and selector in the Card does not. Can Anaplan add the filter capability and standardize selector behavior across NUX?
-
Highlight cells, line items, modules Referenced by a Formula
Reviewing and debugging formulas can be difficult and time consuming. This exersize could be made much easier and quicker by highlighting all the line items, cells, modules etc. referenced in a formula. (i.e. similar to when one clicks inside the formula editor within MS Excel, all referenced cells are highlighted with…
-
Total positions for nested dimensions
Please add option to change Total positions order on rows/columns when nested dimensions are applied. Currently it can only be applied towards single dimension. When adding at lease two dimension, order becomes "Before" by default and the following error is returned when trying: "Cannot group totals on a nested axisSetting…
-
Conditional Formatting on List item (in addition to line item)
Current conditional formatting is based on line items, in addition to this we like to have such possible for list items as well. E.g. highlight particular products, customers or months. Conditional formatting on line items should still be possible in addition and if for a cell both formatting (based on list item and line…
-
NUX (User Experience) Worksheet filters -- PLEASE include "ANY" filter
This request was initially posted in October 2020 in the following post: Worksheet Filter AND / OR logic — Anaplan Community It's only received 16 upvotes and I'm posting this here to bring attention to this major gap between the filtering options in Classic Dashboards vs. the NUX Dashboards. As shown below, classic…
-
Management Reporting Additional Insights Formating
Use of additional insights in Management Reporting is great - having dynamic commentary boxes is what we're using is most for. But feedback from end users is that they would really like to be able to more dynamically format the text like you can with a text box. Don't want to have to give "page builder" to every user as…
-
Add Collapsible Sections within Additional Insights
When utilizing Worksheets, end-user take advantage of the Additional Insights panel to display related information to the main report. But for clients who want to display a lot of things on one page, the Insights panel gets really lengthy and hard to navigate. Currently, we are trying to utilize text cards to group and…
-
Make personal pages more stable rather than relying on cookies
Currently, if a user makes modifications and saves a personal copy of a page, and then clears their cookies/history, those changes will be lost. The personal copy will look exactly like the base version of the page. This is problematic because many times when resolving technical issues with their browser, they may be asked…
-
Management Reporting - Variance Calculation Enhancement
Really great being able to do variance / variance % but being able to do other simple calculations - addition, etc would really add something extra to here. It's probably already on the list somewhere @sprender but just wanted to raise it up just in case!
-
Number Scale Line Item Format
Similar to how we select on the KPI cards front end. Numbers get very clunky and unreadable in Anaplan after they get into the millions of dollars or units. You can create a formula and do this calculation manually for every line item today, but that is very tedious. Maybe it needs to be a master line item module display…
-
Column settings update
Currently, column setting is only allowing to select 1/2/3 lines for label height. It would be great to have the flexibility in setting the pixels rather than selecting 1/2/3 lines (which can also be adjusted by dragging the column height similar to row width).
-
New UX: Context Aware - Board and Worksheets PDF Exports
Currently Management Reporting has the ability to export in bulk for static context selectors. It would be a huge improvement for both Management Reporting and Boards if we have the ability to export PDFs that are context aware. For example, if I have a a set of cards on a UX page and I have items in that list (1-5), then…
-
Quickly add/remove/change models for pages that are linked to more than one model
Currently in the UX manage models area, you can quickly change the model connected with a page if that page is only linked to one model (green X). If that page is connected to multiple models you can't (red X). Propose increasing functionality to allow quick add/remove/change options in the UX manage models area. We…