-
3.3.3.2 Importing data into DAT04 module
Hi, I am trying to import the data from the Data Hub model DAT04 Distribution Center Parameters module into the Supply Chain DAT04 Distribution Center Parameters module. My issue is figuring out the correct time dimensions. I am initially going with YYYYMMDD. Could someone point me in the right direction on what to think…
-
7.2.2 formula error
When I try to enter the formula for Product Family I am getting this error. If I change the format for Product Family to "P2 Products" the formula will work, but I am aware that activity 6 states to label the format for product family as "P1 product family". I do not know what I am doing wrong.
-
3.4.4 Activity: Create Stock Exceptions Review UX Page
As per instructions, UX page for stock exception review, time period are monthly , half yearly and yearly. Where my time drop down shows the weeks too. Is it not managed well till now? Regards
-
L2 MB: INV01 Inventory Ordering Module - Values not cleared when check box is unchecked
Hi All, I am working on the L2 MB: INV01 Inventory ordering module (Section 3.3 Product Replenishment) and stuck at one of the subsections. All the formulas seem to be working except for below senario. Step 1 : I select "Submit Purchase Order Request?" Week 1 FY20 and can see that the "Confirm Purchase Order Receipt" is…
-
7.2.3
Not sure what I did, but the name of the Employee is showing in the code row. How can I fix, is it no related to importing? Or is is something that i need to go back and fix. Please help
-
2.3.9.2 Update Historic Volumes for Baseline Forecast_i am not able to get data
Hi, I have used below offset formula. IF 'SYS01 Time Settings By Week'.'1st Forecast Year?' THEN OFFSET(Volumes, -52, 0) ELSE 0 I am getting all zeros also my volume line item data got blank. At first I was able to see data. But now both the line items showing data as 0. Could anyone please help me. refer attached…
-
Best Places to Look for Entry Level Anaplan Jobs?
Hi There! New Anaplanner here, completed Level 1 and 2 and finishing up The Anaplan Way soon. As I begin to plan ahead and look through job postings, I'm seeing a lot of "1-2 years of hands-on experience required" (understandable) but hoping for some guidance on what would be good entry-level positions for individuals like…
-
Level 1 Exam Question 5
I did all the formulas correct for Bonus, Car, Medical but when it ask me total for Sales department for December 2020 and I entered XXXXXX for phone cost. It gives me incorrect answer. No sure were I went wrong. How do I trace back?
-
Level 1 Exam Activity 5
For last hour I am trying to figure out the formula and what I am doing wrong on Bonus formula. I am not sure if the formula is correct and 'Role' is not rolling up. Any help will be great. Thank you in advance.
-
Level 1 Exam Activity 4
When I am importing the data nothing seems correct. Role is completely missing. Please help I am on activity 4 right now.
-
3.3.3.1 Create Distribution Center Parameters Module
Hi everyone, thanks in advance for any help! I have attached several pictures including my blueprint view and grid view of each module. I believe I have the import set up correctly, screenshot attached. I am receiving "Invalid data or timescale identifier" errors for 371 entries, but I am getting 1484 Updated entries when…
-
6.6.4 Activity: Add Time Settings by Year Module
Hi there, I am having trouble with this activity. Instead of showing the years side by side, it shows them on separate pages. The second picture is what the module should look like. I have also included the blueprint view. Any idea what I'm doing wrong?
-
3.3.12 Activity: Create Product Replenishment UX Page
A quick suggestion please , we have created a INV01 Inventory Ordering module and chart for UX as well but my quick feeling is none of them matches with view in terms of line items and sequencing of line items. We can simply ignore it ?
-
level 1 model building lesson 7.2.1
Any help here would be appreciated. I tried importing the product.csv into the product details module and it did not come out right. It looks like I'm missing something
-
I started exam and my laptop turned off
I started the Level 1 exam and my laptop turned off due to low battery. Can anyone let me know if this count as 1st attempt or not?
-
Anaplan Level 1 Model Builder question 1
Hello, First question on Anaplan level 1 exam is 'what are the steps for building a model'. DISCO is not an option, some of the options were as follows: 1. Create User permissions and roles 2. Create Module 3. Create System dimension for Modules 4. Import Data 5. I do not remember 5th option. I revised the whole lesson 1…
-
10.2.6
seen this error , during putting formula in bonus , car costs, phone costs, medical costs
-
L1MB 9.2.6
GETING THIS ERROR WHEN FORMULATING THE UNIT COST GROWTH%.
-
2.3.9.1 Import data into DAT03 Historic Volumes module_unable to run_getting below error
Hi, I am not able to pull the data into supply chain model. Could anyone tell me adjustments in order to avoid errors in the import process. I am getting below error screen. Thank you,
-
8.5.3 Activity: Import Data into Volume Inputs Module
Hello, I am trying to import data in Anaplan for the revenue calculation activity, it seems to be working but at the end I have the same data in all the columns ( cfr screenshot 1). I don't find where is the mistake ? Can someone help? Thank you in advance
-
Anapaln L1 TEST
I have imported SKU list what will be answer of naming part cant get a clue about it ?
-
6.8.6 Activity
Can you please help I got stuck in an activity (Level1 6.8.6) Please see the screenshots Expected Mine
-
Level 2 - Sprint 1 - 1.3.6.4 - Why Is Default Shipping on the "Location Flat" Tab for Filtering?
Hi everyone, thank you for any help! I am on Level 2 - Sprint 1 - 1.3.6.4 - Where I need to filter to only show locations with a Distribution Centers. I was able to complete this successfully, but I am confused as to why the "Distribution Center?" subset is available on the "Location Flat" tab of the filtering window…
-
activity 7.1.3 Mapping
I am stuck with the activity in Lesson 7, mapping. All my mapping attempt is wrong and I think I understand it. I don't know what is wrong.
-
Marked as (Fixed Target Item) in the Mapping tab; please specify a value (ERROR)
I'm trying to complete my Level 1 Model Exam and continue to get the below error: Marked as (Fixed Target Item) in the Mapping tab; please specify a value I searched the Community, and have not found any help/solutions. Additionally, I tried to do the same task in the Level 1 Model File that was given in the initial exam…
-
L2 Sprint 3 INV01 Shipping Time Weeks
Hi, It shows just zero in Shipping Time Weeks line of my INV01 Modules although the formula is correct. On the other hand, TRA01 Shipping Metrics by Week do not have data yet. I don't know where I am doing wrong. Here is my screenshot with the formula for Shipping Time Weeks line : Expexted: All helping efforts are…
-
INV01 - Shipping Time Weeks
Hi, I am trying to add a formula for Shipping Time weeks in the INV01. I have tried these formulas but they don't work: 'TRA01 Shipping Metrics by Week'.'Shipping Time (Weeks)' [LOOKUP: 'SYS08 SKU Details'.Product, LOOKUP: Shipping Method] TRA01 Shipping Metrics by Week'.'Shipping Time (Weeks)'LOOKUP: 'SYS08 SKU…
-
8.5.3 Activity: Import Data into Volume Inputs Module
Hi - I am trying to map an import into a model and my results are calculated as zero. I attached my mapping and the results. Can anyone help me what is the issue with the mapping please? Thank you so much!
-
INV01 Inventory Ordering
I notice that some of my numbers in this module are off compared to the examples. Is this a byproduct of something wrong, or could it be slight differences in the data. I have attached a screenshot of my figures.
-
Anaplan Model Builder Level 1 7.2.2 Help
Hello, I imported data into the SYS06 Product Detail module and it went through smoothly while also aligning with the picture show in the "Check Work" section of the Lesson Plan. I tried to enter the formulas for the same module and I keep receiving an error. The error suggest that I have no hierarchy attached to the lists…