-
Preparation for Level 2 Sprint 1 exam
Hello friends, Would you advise how can I prepare for Sprint 1 exam? What am I expected? I done the course without much difficulty. It's just before I attempt, what topics should I keep in mind? Just making sure I revise right topics.
-
2.3.13 Create global demand assumption ux page
Hi , as a learner I don’t have access to page builder . Please advise how should I proceed then . I cannot create action on my pages . regards, Ankita
-
Level 2 Sprint 2 Global Demand Assumptions UX and Line Chart Saved View
Please guide. I found that these two views are exactly same. What is the difference. Regards, Ankita
-
2.3.11.3 Create Line Chart Saved View
Hi , I am very confused on Level 2 Sprint 2 module. Here in the above screenshot we are just creating the formula for Growth Rate% , rest everything remains zero. But then next steps we are asked to create saved views based on Baseline forecast and Initial demand forecast. (Global Assumptions Grid UX) Am I missing…
-
2.3.9.2 Update Historic Volumes for Baseline Forecast
Hi I am having trouble with the formula creation ,Please help I am using the below formula : IF 'SYS01 Time Settings By Week'.'1st Forecast Year?' THEN OFFSET(Volumes,-52,0) ELSE IF ('SYS01 Time Settings By Week'.'2nd Forecast Year?' THEN OFFSET('Offset Volumes for 1st Forecast Year',-52,0) ELSE 0 I am getting an error as…
-
2.3.9.1 Import data into DAT03 Historic Volumes module
Hi All, I am not able to understand actually what exactly needs to be done. I am trying to run the action 9.1 but I am getting an error Below is the screen shot of what I need to do Regards, Ankita
-
L2 Task 1.3.7.4 instructions subset confusion
In Task 1.3.7.4 we are asked below: 1.3.7.4 Create s G3 Location: Distribution Center? List Subset Under the ---Try It Hierarchies--- category, create a new list subset: List Subset Name: s G3 Location: Distribution Center? I am hoping that we are asked to create a subset under G3 location and not another list under ---Try…
-
All About Talent Builder Guided
Talent Builder Guided is here to guide you on your journey to becoming an Anaplan Certified Model Builder You’ll join a learning program group for an 8-week journey during which you’ll complete: Level 1 Model Building Level 2 Model Building While taking these courses, you’ll belong to a Learning Center Course where you can…
-
Talent Builder Success Stories
Abinash Nayak Abinash Nayak joined an Anaplan training program while getting his MBA at Carlson School of Management in MN. Along with a love of the platform, Abinash loved that Anaplan wants to give back to new learners. He saw that Anaplan employees were eager to collaborate with the internship group. The…
-
2.4.7 Activity: Create Saved Views for UX
My DEM03 gROWTH RATE% FORMULA: 'DEM02 Volume Growth Rates by Week'.Growth %[LOOKUP: 'SYS08 SKU Details'.Product Family] It went through, however in further training 2.4.7 of Sprint 2 it is asking me to create a saved view which should look like ( below screenshot as per the course) But this issue is my DEM03 contains…
-
MB Level 2 Sprint 1: 1.5.2 Activity: Import Data into Beginning Inventory
Hi, I currently trouble importing data into the DAT01 Beginning Inventory module. Kindly advise.
-
Level 3 sprint 1
Hi Experts, A couple of weeks ago, I imported data into the below module. Then, I summarized the above data into the below module. I have no clue to get data PY Country and Product Family Sales in the below module. Please advise me. Regards,
-
L1 MB Lesson 8.2.3 - Add Margin Calculation Module
Hello, I didn't setup the dimensions correctly. So I use Pivot to re-arrange the items between row, column and pages. Below are the corrections I did via Pivot. Corrected module layout When I close out of REV03 module and re-open again, the corrected layout is not saved. The module layout reverts back to the old version…
-
L1 MB Lesson 6.6.5 - Add Formulas to Time Settings by Year
Hello, Formulas were added to line items as per below instructions. But I am getting a different results to the example module. In my module, check marks are missing for line item 'Forecast Period' under FY20 and FY21 columns. The formulas are the same so I can't work out why the check marks are missing on my module. My…
-
L1 MB: Lesson 6.6.3 Add Formulas to Time Settings Module
Hello, Formulas was updated in the Time Settings module as per below instructions. But in grid view I notice my module is missing check marks in FY19 (Actual Period), FY20 & FY21 (Forecast Period) columns which is different to the example module. I've gone back to the instructions and the formulas and formats are the same…
-
Any tips for understanding use cases and course content?
When I interact with Anaplan and groups of people in the real world I find it easy to take notes and understand what the users want to achieve. I ask broad questions and get a good grasp of the landscape they operate in, their preferences etc. When following the course material I miss this interaction with people. The…
-
Anaplan L1 Training - Error Message
Hi, I am trying to access L1 Anaplan Training modules, however I am presented with the following error message: anaplanenablement.s3.amazonaws.com’s server IP address could not be found. I have cleared caches and still does not resolve the issue, please could someone kindly assist. Thanks
-
Level 2 Sprint 1 Lesson 1.5.8 Create saved view for Dat03 module
Hello All, I am unable to get the desired view. please help. this is the expected one. And i am getting below one as: I have attached the screen shot for summary and filter. Regards, Ankita
-
Need help for Creating & adding Model to Workspace from start to end
Hi..... Greetings!! As, Anaplan is totally a new thing for me, I am trying to learn it by my own. Though, I have been able to understand theoretical portion of Level-1 Model Builder but I got stucked when trying to create/add Model to Workspace : I could not understand that from where to start, how to start and proceed…
-
Embarking on Level 3
Hi I have a question on best practices on embarking on Level 3 Model Building. Understand the pre-reqs are as follows: * Level 1 Model Building and Level 2 Model Building course completion * A minimum of 9-12 months of Anaplan project experience * Proficiency in the use of Anaplan functions in formulas (e.g. SUM, LOOKUP,…
-
Level 2 Sprint 1 Lesson 1.3.10
Hi, I have build the saved view of location. But when i am importing this into another model the work expected is different. What am I doing wrong ? Mine work is below : I am not getting the distribution center option. Regards, Ankita
-
Level 2 Sprint 1 - Lesson 1.3.3 Import Data into Region Flat list
Hi All, I am not able to import the flat file into the Region. Please help. Attached are the screen shots. It says 0 updated. Please help. Regards, Ankita
-
L1 MB - Lesson 8.5.3 Import Data into Volume Inputs Module
Hello, I don't know what I did wrong with mapping source to target. Error log indicate something to do with Volumes and I check the mapping relating to Volumes and it has been set to 'Fixed line item'. Back in the Grid View, I can see all the data came across. So I'm confuse now by the error mention in the log. How do I…
-
Level 1 model Building Activity 5
Hi @JaredDolich i Have stack with how to update the formulas for my Line Items in my Module EMP02 Employee Expenses. This is the formula i am using IF Employed? THEN Salary * 'EMP03 Employee Drivers'.Bonus %[LOOKUP: 'SYS08 Employee Details'.Department, LOOKUP: 'SYS08 Employee Details'.Role] ELSE 0 i have read other…
-
Level 1 Exam - Question 5
I dont know where i'm going wrong.....this is the formula I'm trying to use.... IF Employed? THEN Salary * 'EMP03 Employee Drivers by Role'.Bonus % [LOOKUP: 'SYS08 Employee Details'.Department, LOOKUP: ''SYS08 Employee Details'.Role ] ELSE 0