-
Done with L1 and L2. What next?
Hello Anaplanners! I recently completed my L2 certification for Anaplan. Unlike L1 and L2, there are no courses in the Anaplan Learning Center for starting or enrolling in L3 certification course. Can anyone let me know the next steps towards getting an L3 certification and an eventual Certified Anaplan Model Builder…
-
Anaplan Partners for FP&A
Hey there, Has anyone implemented Financial Planning & Analysis in Anaplan for an organization without an Anaplan partner or a light one? If so, how was your experience? Thanks! Andrew
-
How I Built It: Dynamic source data selection
Author: Erik Svensson is a Certified Master Anaplanner and a Principal Solution Architect at Anaplan. Hello Anaplan Community! Thank you for checking out my ‘How I Built It’ tutorial. In this video, I showcase how you can set up end user selections to vary data sources across one or more hierarchies. This is a dynamic way…
-
ADO - Select File on "Run"
Using Anaplan's traditional data import functionality when an import action linked to a csv file was triggered through a dashboard\UX page the end-user was prompted to select the file to import. The import uses the structure defined from the original file and applies it to the chosen file. Can this same prompt be achieved…
-
IF condition for Summary Method
I have the above highlighted Summary for the line item, Amount YTD+. May I know how I can change the Summary Method to be conditional like below (It SUM for P&L but CLOSING_BALANCE for Balance Sheet): IF(PL?,…
-
ALM explained—Part 3: avoiding data loss
Introduction In part two of the new ALM Explained series, we discussed the best practices for testing and validating changes prior to deploying them to production models. However, we also know that testing protocols are not always followed, especially if the change is an emergency patch, and sometimes, the synchronization…
-
REQUEST: allow the user to Import ALL dashboards from a Model.
Either a single button that does this or let us use checkboxes to select multiple Classic dashboards at the same time. I would also suggest that we support importing of Content Sections as Categories and auto-categorize dashboards based on these Content settings. I could see that this might only work well if we supported…
-
Need help with a time filter
Can someone please help me implement the given scenario. I have implemented it but there are certain loopholes that I am having trouble fixing. Scenario1 : I have a module with version list on rows , 4 line items(1,2,3,4) on columns and Time range FY15 on columns after line items. For LI 1,2,3 I only want to see years and…
-
Dear Anaplan, A love letter
My Dearest Anaplan, On today the day of love, I must confess deep and fervent feelings. I love you, I love you, I love you! From the early days of our courtship where you filled me with visions of possibility, to the late nights where I dreamed of solutions we may create together, I have loved you dearly. Past lovers be…
-
A conversation with Lis de Geus — Journey | Anaplan Community Podcast
Today we're excited to share episode 16 of Journey, an Anaplan Community podcast. Our host, Dennis Lemoine (@DennisL), Director of Customer Engagement & Experience, chats with Lis de Geus (@lis.degeus) — Certified Master Anaplanner and Principal Solution Architect at Bedford Consulting. Lis has been in the FP&A space on…
-
How to delete List with Zero Across all Years and Not a Single Year
Hi Anaplaners, I have a data upload using list properties. I would like to delete the List for Store with zero values in a calculation module Dimensioned by Store List. The problem am facing is when I capture the sum of value with zero and I delete the Store List in the system module using "Delete using List selection" it…
-
Improve Mobile Browser Experience for Anaplan Website/Platform
In as much detail as possible, describe the problem or experience related to your idea. Please provide the context of what you were trying to do and include specific examples or workarounds: How often is this impacting your users? The issue occurs consistently for model builders when attempting to provide support via…
-
Performance Issue / Page Crashes with Hierarchy Card
We are working on running a Page context using a 9 Level Hierarchy and the idea is to expand/collapse click through the levels while the dependent Grids on 10th Level get updated [ Hierarchy Filter Context Synced] Unfortunately - the card navigation response is a little sluggish and takes 5-6 mins to get the context…
-
New UX Dropdowns
Hi It looks like the app/page dropdown colourings have changed this morning from blue/dark blue to white. Is there an option to change these back or perhaps select our own colours? I personally prefer how it was before and other users have mentioned the same. Thanks
-
The city of planning
Author: Arun Thakar, Certified Master Anaplanner and Vice President in the banking industry. Somewhere in the cloud lies Anaplanopolis, the city of planning. The airports and train stations are Data Hubs. Downtown is where financial planning models reside, and in midtown are sales and revenue models. The streets are paved…
-
6.6.4 Activity: Add Time Settings by Year Module
How to do this ? if some one could guide me step by step…thank u
-
3.3.6 Activity: Test the Shipping Cost Formulas
I don't understand, why in the item "Confirmed Purchase Order Receipt" modifying my formula using "POST" : IF Confirmed PO Delivery > 0 THEN POST(Final Shipment Amount, Final Shipping Time Weeks) ELSE 0. It does not give me the expected result. Can you support me please
-
Hello again, a question with 6.6.3 Activity: Add Formulas to Time Settings Module
so this is how module should look like as per screenshot shared by Anaplan, so if someone could help me what am I doing wrong? However I got this (find below) , although I put all functions in right terms Blueprint view
-
I need a formula that can return True for months up to a desired period and return False Otherwise
This is a Boolean Format where I need a true to populate if the months up to and including the desired date are true. Any help or tips on formula?
-
Can Fluence Xl be learned through Anaplan Free Trail ?
Fluence Xl can be learned through any training or it needs the license which need to purchase by the company?
-
Enable Specialized Layout / Filtering in UX that Avoids Using Booleans
Planners and managers contribute to the planning in multiple ways in Anaplan solutions, entering numerical values, text entries, boolean business decisions like yes/no/approved… etc. Such users have contribution licenses to have the right to use Anaplan and contribute accordingly. Some other users are intended to be…
-
Quarter Filter
How to create a user specific filter, where user selects a particular year, and only those quarters of year selected should be visible?
-
Function that locks the specific models
I would like the function to lock specific Models at "Model Management" so that they can't be easily deleted.
-
Dynamic columns width change in the New UX
As a model builder, I need the ability to set up a dynamic change of column width in the New UX - the same way as it was in the classic UX. That might be extremely helpful, especially in terms of selecting different types of a selected view (like periodic, quarterly, yearly, etc.), and quite convenient for users. For…
-
Faster method for SUM from multiple sources
Hi Everyone, Can anyone confirm which of the below is faster? Final Line Item = Module A. Line Item A [SUM: A, SUM: B, SUM:C] + Module B. Line Item B [SUM: A, SUM: B, SUM:C ] Line Item 1 = Module A. Line Item A [SUM: A, SUM: B, SUM:C] , Line Item 2 = Module B. Line Item B [SUM: A, SUM: B, SUM:C ] , Final Line Item = Line…
-
3.4.3 Activity: Create Country Summary Module (SYS08 SKU Details)
Having issue with SYS08 SKU Details "Country Made In" formula tried both formulas. I believe its because its a list that I am searching in but not sure best resolution would be ? Formula: 'SYS07 Distribution Center Details'.Country[LOOKUP:'SYS07 Distribution Center Details'.Country ] Error: The dimension of mapping used…
-
How to display one previous month of custom time
I am using a list with its own time. If it is a normal time, I can set it to the previous month by doing Time-1, but I can't do it with my own time. Please let me know how to do this. Thank you in advance.
-
Level Mismatch Error
Hello All, I am getting level mismatch error while set up the summary method as ratio, i am not able to set up the applied to and ratio as describe in the below ss simultaneously. what is the possible reason for the error and any ideas and suggestion would be appreciated, thank you for your help.
-
Users - built in top level not required
For a line item i need to apply ratio in summary and then in applies to select a general list. but it allows me to either do the ratio calculation or the applies to, when trying to apply both the things i get the below error "Count over Users hierarchy is not possible as Users does not have a built-in top level" I do not…
-
Workspace for practice analplan
I completed all my activities and assessments for The Anaplan Way course. And i want to access workspace for practice, & how can i get it.