-
How is a typical environment setup in Anaplan for SDLC?
I am interested to understand how a typical environment for Software Dev lifecycle needs to be setup in Anaplan? Do we have different workspaces for Dev, Test and Production or is that carried out in a single workspace with models for dev, test and prod. What are the pros and cons for either approaches?
-
Multiple Model Builders
Hello, We are at a point with some of our models where we would like to train up new model builders to take over the ongoing maintenance and tweaks to a given model. We are debating the wisdom and practicality of allowing multiple users to have model builder access to a single model. Currently I can argue both sides of the…
-
Moving Production Model to new workspace
We currently have ALM set up between our DEV -> QA and DEV -> PROD models in our workspace. We have 1 DEV and 2 PROD with the same DEV model. So now the Production workspace is almost full, so we are planning to move one of the PROD model into a new workspace. Please confirm if we will still be able to sync any changes…
-
Application Lifecycle Management for the User Experience
Application Lifecycle Management (ALM) enables your governance, development, and maintenance of Anaplan use cases. You can now work with ALM features in Anaplan’s User Experience (UX) to manage the lifecycle of your pages alongside that of your models. With the UX, you now build pages inside apps. Apps contain all the…
-
Module Lines System Generated 'Created by' and 'Modified by' Detail
All module lines should include system generated "Created By" and "Modified By" detail for audit trail, compliance, and support reference. It is not always clear as to whom created or modified a line in a module. If a consultant or contractor is making changes to lines, the only way to find that detail is by combing…
-
Building a Model Steps
I've missed the order of steps for building a model twice. Since this is the only question that I missed can somebody please help me understand which steps I have out of place? Step 1. Build centralized dimensions in the model (time, version, lists) Step 2. Build Modules in the model Step 3. Build centralized Import data…
-
Any way to export which NUX Pages a Role has access to?
We are trying to get a list of all roles + the pages they have access to in the NUX for a single model. If I go to the 'Manage Access' page for the app in the NUX, I can see each page/category + the roles that have access to it. Is there any way to export this table? I thought about just manually copy/pasting it out but…
-
Block ALM
Hi Team There are instances where we do not want the production model to be updated using ALM. This is required when we have any model developers working on the same model, and don't want any of them to accidentally move changes to PRO. With this option we are better prepared for risks that may occur for data loss or…
-
Cloudworks integration user role
As a tenant admin, i would like to allow users to run cloudworks integrations and processes that have been prepared by integration admins. This is required as currently only the integration admin can access and run cloudworks processes and if granted to non admin users, they could destroy existing production setups. I will…
-
Please allow the office add-in to authenticate through VPNs and Proxies with out the need to white l
Brief description of the idea As a user of the Anaplan office add-ins, I often need to connect to the internet via a proxy or VPN. Due to IT/security policies, I am unable to white list. This prevents me from using the office add-ins from certain locations. Expected benefit/impact The benefit of this enhancement would be…
-
Model impersistence across pages in the application
Our case: We are separating clients data into different models and manage access via those models administration We have a single application that points to those models and allows users who have access to switch between them (assuming that they would switch between clients data sets) When user switches pages of the…
-
User Access Between Schedules and Snapshots
I have a user who has access to schedules but doesn't seem to have access to the corresponding Snapshots. A few things I have tried so far, are: 1.) Confirm their role and that they have access to the schedules 2.) Used my account as a test account to recreate the issue. When I tried to recreate the issue, I was able to…
-
CA Certificates for Service ID (Password less Connectivity)
Do we have a list of CA Certificates that are mostly used to implement password less integration with Anaplan and if anyone has an estimate of pricing & validity of those certificates? Our client is looking for the feasible options while choosing the Certificate Provider - So a consolidated list will actually help the ask.…
-
Delete from list using selection action shouldn't ignore selective access for workspace admin
Description of the enhancement: Do not allow workspace admins to run delete from list using selection process in sections of a list they haven't got selective access to. An example of the enhancement: User A ticks delete Boolean in the section he/she has access to, but decides thoughtfully not to run delete from list using…
-
Initial User Welcome Email Formatting
Anaplan recently updated the formatting of their welcome email when a Workspace admin adds a user for the first time within Anaplan. The email title is "Active your Anaplan Account". We only allow users to login via SSO in our organization, however, clicking on "Active your Anaplan account" from within the email prompts a…
-
More descriptive history entries for Blank Model Changes
Model history can contain entries saying "Blank Model Change", which can occur for example when changing the SSO access of a user. These could be more informative so we can understand what the change was. Another example - if you are setting a users access, it is usual to copy another users access by selecting an entire…
-
Internal access (Full access) for Cloudworks to work on Selective access in Admin Portal
Hi Team, At present for the cloudworks actions to read the lists with selective access, 'internal (full) access' must be enabled within the list, which is quite tough to do in a live production model without disturbing the user's access. It would be ideal and intuitive if the access was controlled externally either through…
-
Service Account Password Expiration Exception
It would be helpful to have the ability to grant a service account an exception from an expiring password in Anaplan. For integration if the client doesn't want to get into certificates.
-
License Management
Hi, Currently we have no clear picture of how different users are counted to Anaplan subscription. I would like to have a page in Administration that would show, which users are considered Builders / Professionals / Readers by Anaplan and are going to be charged. Ideally I would like to specify user type myself, so that…
-
Modelling using users properties
As a model builder, i d like to be able to model aroynd users properties that are found in "users" panel in order to bring new functionalities to functional admin users, granting them in dedicated modules or actions within a model the following - ability to check users selective accesses rights (read / write permissions)…
-
The New UX should have ALM capabilities for managing changes like the old UX
Hi Anaplan, The New UX currently lacks ALM capability like the old UX does. The benefit of this would be managing updates to apps as you currenly can in the old UX. It would great if the New UX had ALM capabilities like the old UX. Thanks, Usman
-
Select display name of a numbered list in the configure tab
It would be good if you could choose the display name of a numbered list item in the Configure tab, as well as going to the list settings.
-
Selectively hide objects (models and pages) on the Front Door Landing Page/Home Page
Workspace Administrators need the ability to selectively hide objects (models and pages) on the Front Door Landing Page/Home Page based on roles. All of our end users (400+) are accessing Anaplan data through the Apps, and they have no need to go into the models. They won't see anything in the models should they open the…
-
Copy Model also copies Audit Log History
When you copy a model, it would be nice if the model's full history log was also copied instead of being reset in the new model. A couple times in the past year we have needed to copy and deploy production models from existing production models in order to handle high-risk updates being pushed from our development model.…
-
custom function script
Allow users to create custom function via a scripting language like Java. The idea to me is have the capability to become as flexible as needed with scripting. The use case i have in mind is being able to create a hashing algorythm to use as a code. This can be a work around to the 60 limit character limit.
-
NewUX - Historical log for app changes
As a page builder, I would like to have access to the historical log of all the modifications of the pages for an app created using the NewUX. NewUX it became the "official" Anaplan interface. The apps can be a result of the collaboration from a lot of page-builders. In the building of the pages, it can be used the custom…
-
ALM - How to LOOKUP native Versions
Currently, using SELECT statements in formulas for native versions - Actual/Forecast. But, this will not work with ALM, so what should be an alternate approach for looking up native versions in formulas with ALM implementation?
-
How to update production list data in prod model
1. After deployment if any changes came then where we are updating that changes in development models production list or directly in production model. If Prod model is in deployment mode then how that model will track production list changes. 2. Could any one please guide me how the workflow of dev, test and prod models.…
-
ALM with Select Function
I know that the ALM has draw Back of Selcect Function.BUt, I want to understand why the Select Function Is DRaw Back and why Can we use the Select Fucntions in Production lists